- F1 GENERAL SEAMING / BOTTOM HEMMING
- F2 TAPE BINDING WITH ELASTICBAND
- F3 ORNAMENTAL TAPE BINDING
- F4 OVERLOCK-SEAM COVERING STITCH
- F5 ELASTIC / LACE ATTACHING WITH RIGHT FABRIC TRIMMER
- F6 FINE TAPE BINDING
- F7 PINTUCK SEAMING
- F8 BELT-LOOP SEAMING
- F9 TAPE ATTACHING
- F10 LAP SEAMING
- F11 POCKET LINING SEAMING
- F12 FOUR-NEEDLE FLAT SEAMING
- F13 TOP FEEDING FUNCTION
Upper Thread Gripper
Newly designed auto trimmer trims precisely and stably.
The Recessed Machine Bed
The sewing material is closer to the needle and the sewing is precise, which makes sewing operation easier and smoother.
Cover seaming with adjustable folder, flexible presser foot, accommodate wider range of sewing items.
Auto trimmer with newly designed pneumatic / electric trimming system
trims precisely and stably, lower sound and easy to adjust.
GENERAL SEAMING / BOTTOM HEMMING
Basic model of interlock sewing machine with double side cover-stitching. It is available for various sewing by optional devices. Such as plain seaming and bottom hemming for underwears, sportswears, etc. (equipped with adjustable hemming set).
| OPTIONAL DEVICE |
| UTG , UTH , UTJ , UTK , FL |
W121 : Light material
W122 : Medium material
W123 : Heavy material
W162 : High needle bar stroke
W162H : High needle bar stroke
Long stitch length (6mm)
FFD / FFP : TAPE BINDING WITH ELASTIC BAND
Top feeding device controls the elastic band’s tension. Elastic band right-left position controller (by knee-pushing) sets the materials joining at the beginning and ending of waistband, leg opening of briefs…etc.
FFD : Gearbox type for accurate tension control
FFP : Spring type for simple tension control
FQ : TAPE BINDING
For tape binding on openings of leg or neck of underwears, T-shirts, etc. Also can attach electric(FEC) or pneumatic(FAC) tape cutter to save tape and increase sewing efficiency.
| OPTIONAL DEVICE |
| FA , LF-A , FAC , FEC , LS-A |
Optional device for the above models
FNC, FSC:
Sensor type rear cutter with direct drive servo motor
ORNAMENTAL TAPE BINDING
Suitable for ornamental tape binding of neck band, bottom or cuff of T-shirts, shirts, etc.
| OPTIONAL DEVICE |
| FA |
OVERLOCK-SEAM COVERING STITCH
FDC Fold-down type :
For 4-thread overlock-seam covering stitch.
FDE Flattening type :
For 3-thread overlock-seam covering stitch, and an extra guide of overlock-seam (FDC specification, fold-down type) is included in the accessory box.
| OPTIONAL DEVICE |
| UTG , UTH , UTJ , UTK |
ELASTIC / LACE ATTACHING WITH RIGHT FABRIC TRIMMER
Top feeding devices ensure even length and tension controlled by electric digital controller, with right side fabric trimmer for elastic or lace attaching smoothly and properly on women’s underwears.
FFC : Mechanic Type Tape Feeding
F E : Simple Electric Type Tape Feeding
SMK : Electric metering type tape feeding
SMK1-C-01 with synchronizer for simple servo motor or clutch motor.
SMK1-C-02 Connected to servo motor by encoder cable.
STC : Tension Sensor Type Tape Feeding
STC1-U-01 with synchronizer for simple servo motor or clutch motor.
STC1-U-02 Connected to servo motor by encoder cable.
| OPTIONAL DEVICE |
| FAC , FEC , LF-A , LS-A |
FINE TAPE BINDING (RIGHT SIDE FABRIC TRIMMER MODEL WITH SMALL BINDER)
This machine is applicable for fine tape binding of women’s underwear or T-string. Before tape binding, the fabric edge is trimmed by the right trimmer. This solves the problem of bad binding, which the tape is not sewn on the fabric.The below tape feeding devices are applicable.
SMK : Electric metering type tape feeding
SMK1-E-01 with synchronizer for simple servo motor or clutch motor.
SMK1-E-02 Connected to servo motor by encoder cable.
STC :Tension sensor type tape feeding
STC1-S-01 with synchronizer for simple servo motor or clutch motor.
STC1-S-02 Connected to servo motor by encoder cable.
| OPTIONAL DEVICE |
| FAC , FEC , LF-A , LS-A , TUA |
PINTUCK SEAMING
To sew a decorative convex stripe on sportswears, jeans or other clothes, can also add extra stripe inside convex to increase the effects of convexity and decoration.
BELT-LOOP SEAMING
Mass production for belt loop by using stripped tape.
| OPTIONAL DEVICE |
| LF-A , LS-A |
TAPE ATTACHING (TWO NEEDLE, TWO LOOPER)
This machine is specially for tape binding on cross seaming of men’s briefs or sportswears to strengthen plain seam and for ornamental purpose.
U 7 1 2 : finished tape width 10mm
U712A : finished tape width 12mm
TAPE ATTACHING (FOUR NEEDLE, TWO LOOPER)
This machine is specially for tape binding on cross seaming of men’s briefs or sportswears to strengthen plain seam and for ornamental purpose.
LAP SEAMING
Differential ratio of left and right feed dog can be adjusted separately for lap seaming to ensure symmetrical length to both left and right fabric. Applicable to trousers, casual pants and jeans, etc..
POCKET LINING SEAMING
This is a 3 needles 3 loopers 1 spreader machine, and special for seaming the shell fabric and lining of pocket in trousers or work pants in simple operation to increase sewing quality and efficiency.
FOUR-NEEDLE FLAT SEAMING
For flat seaming 2 pieces of fabric. Equipped with fabric guide for easy operation.
|
FW- 4
|
4 needles Without retainer, applicable to upper thread trimmer
|
|
FW- 4A
|
With special needle plate E1838P, applicable to shoe decoration
|
|
FW- 5
|
4 needles with retainer, not applicable to upper thread trimmer
|
| OPTIONAL DEVICE |
| UTH, UTK |
FFT TOP FEEDING FUNCTION
Back and forth moving feed dog is designed by patent and improved mechanism. The effective feeding stroke is bigger, and fabric feeding is more stable.
| OPTIONAL DEVICE |
| UTG, UTJ |
