Remark :
Standard : Professional table, All Set of Button Presser Foot ,Small/Big Button Serrarted Plate and Bottom Plate, 12 Sets of Standard Button Carrier.
Option : 3-Holed of Button Carrier,Button Spacer,Button Spacer with Laser Light.
*The definition of Button Size:
Extra small button size is Φ8~10mm, small button size is Φ10~20mm, and large button size is Φ20 ~ 26 mm. Basically, Button clamp of machine head is applied for
Φ8~26mm, but that sewing extra/ large button size are depend on its thickness and convexity.
**Suggestion of selecting the serrated plate
| Button | Size: Φ8~16mm | Size: Φ16~25mm |
| The small serrated plate | The Big serrated plate |
Features
Electronic button sewer with auto-feeder: Seamless workflow with 3x the speed of conventional machines.
Cycle Time: 2.2 Sec / Button; 13,090 Buttons/8 Hrs
ONE-CLICK SIZE DETECTION
with one-click, machine will automatically detect the width and thickness of button, and adjust to corresponding position.
ANTI-COLLISION PROTECTION
During continuous operation, accidental pressing of the foot pedal will disable the button feeding mechanism, preventing structural interference between the feeder and the attaching machine and minimizing potential damage.
EASY OPERATION
with smart panel, users can operate easily.
HIGH COMPATIBILITY
automatic button feeder is compatible with various button sewing machine brands.
MAIN & SUB BUTTON ATTACHING IN ONE OPERATION
Set the required quantities via the HMI, and the machine will automatically alternate between main and sub buttons during continuous operation – No need for separate processes.
SUPPORTS SINGLE OR DOUBLE THREAD TRIMMING
Depending on button attaching requirements, the machine can be set for single or double thread trimming.
EASY SWITCH BETWEEN 2-HOLE AND 4-HOLE BUTTONS
Simply change the clamp and switch modes with one touch.
FLIP MECHANISM
Flip mechanism enhance the accuracy of ø16mm up button by auto air-blow.
SMART SENSOR OF BUTTON CLAMP
Button clamp can detect the button position and avoid sewing without button.
BUTTON CHANNEL ADJUSTMENT
Channel adjustment is controlled by stepping motor accurately .
DISCHARGING
Press the key and then remove all the buttons in the channel.
ELECTRONIC AUTOMATIC MEASUREMENT OF BUTTON SIZE
Accurate, Ultrafast, adjusting different button in a short time.
BUTTON CLAMP OF MACHINE HEAD
Button clamp is suitable for variety
button size, the clamp can be used
in different button size and no further adjustment needed.
BUTTON CARRIER MODULE
Modularized button carrier is for
different button size and replacement.
Button Carrier Specification
| Codes of Parts | X＋0.05－0.05 | D＋0.05－0.05 | Button Holes |
| ABF118 | 2.2 | 1 | 4 |
| ABF119 | 2.2 | 1 | 2 |
| ABF120 | 2.4 | 1.2 | 4 |
| ABF121 | 2.4 | 1.2 | 2 |
| ABF122 | 2.8 | 1.2 | 4 |
| ABF123 | 2.8 | 1.2 | 2 |
| ABF124 | 3.2 | 1.2 | 4 |
| ABF125 | 3.2 | 1.2 | 2 |
| ABF126 | 3.6 | 1.2 | 4 |
| ABF127 | 3.6 | 1.2 | 2 |
| ABF269 | 2.6 | 1.2 | 4 |
| ABF270 | 2.6 | 1.2 | 2 |
Button Shape
| Available Shape of Button | Unavailable Shape of Button |
 |
 |
| The two sides of the button must be clearly different to distinguish the front and back (There must be a gap of more than 1.2mm between the concave surface and the convex surface) |
Machine can’t work if one side of the button is identical to the other. |
